Saturday, September 22, 2007

To Cap it Off

This week I made a "floating chimney cap" to cover the opening of the chimney. I made a wood frame with scrap wood and placed it on a piece of insulating foam on the front porch. I wrapped some thin packing styrene around the base of a clay tile chimney liner and placed it at the center and proceeded to make some concrete using perlite and portland cement so that it is light in weight. The thing "floats" because it is not bonded to the chimney so it will expand and contract without cracking. The gaps are filled with fire proof caulk and it will be attached to the chimney with lime morter which is softer than the concrete. There is a slight slope from the center to the outside edges to allow water to run off the surface.



When I was done with the light weight mix I mixed some all purpose sand with portland cement in a 1:1 ratio and troweled that over the top surface. Once I put the thing in place I will trowel a similar mix on the exposed edges.




I will leave the thing in the frame until it is in place. I used a light weight mix because I have to get this thing out of this dormer window on the third floor and along that box gutter



To here



and it is a lot easier when the thing weighs 20 lbs instead of 100 lbs! You can see I already put a stainless steel cap on the chimney. This was to stop the rain from coming down the chimney. We used to get very little water in the fireplace because the brick sucked up all the water. Now, with a stainless steel liner it all enters the fireplace.

I am still waiting for our big bags of vermiculite to arrive so that I can pour that down the chimney to insulate the liner. In the meantime I installed our old time door bell and actually ran old style telephone wire that I salvaged from the house to service it. The old style wire is thicker than modern telephone wire. This cable has 4 wires not two so I will be able to add a second bell to the circuit if I need to at a later date. The bell works great but may not be loud enough to be heard throughout the entire house. We know the house is old (1845) and the ringer is old (1892)but the actual door bell displays neanderthal qualities! I think I'll call it "Sparky"!

1 comment:

Rachel said...

i hadn't browsed through your blog in a while so i thought i'd see how the house is going. :D my husband and i might be moving to dayton in a couple months so reading about people with old houses is fun. i noticed there are some pretty fun looking old houses in st annes hill that are around 23,000... thats much better than the 1000/month rent we're currently paying. hmm :) i'd have to convince my husband to dig up his house fixing skills... :D